Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Inwood Homeowners Choose Lennox Air Duct Cleaning
We provide independent Lennox air duct cleaning and air-pathway service in Inwood, NY. What sets our Lennox work apart is that we treat the whole system as one: the ductwork, the evaporator coil, the air handler, the flex runs, and the ventilation equipment all get inspected and cleaned together, because a Lennox system only moves air as well as its weakest section. We are not affiliated with, authorized by, or sponsored by Lennox. We’re an independent local service working on the equipment itself. Our technicians have up to 8 years of experience and use professional-grade Rotobrush and Nikro systems, not shop-vac rigs. Call (855) 974-7305. We answer 24/7.
Why Trust Air Duct Cleaning Inwood for Your Lennox Air Duct Cleaning?
Lennox equipment has habits. The air handlers and coils sit inside cabinets with specific airflow paths, and the duct connections don’t look like every other brand’s. Technicians who work on Lennox systems learn which seams fail first, where the coil cabinet collects dust, and how the blower assembly behaves when debris builds up. That familiarity saves time on diagnosis and keeps us from guessing.
We use quality parts that fit Lennox equipment. For critical components like blower motors and evaporator coils, we source genuine Lennox parts when they’re available. For duct repairs, mastic, and insulation, we specify high-quality aftermarket materials that meet or exceed OEM specifications. Nothing gets forced to fit.
Warranty-safe service matters to Inwood owners, especially in co-op buildings where a repair might touch shared equipment. We don’t cut into sealed refrigerant circuits for cleaning, we don’t disturb factory components without cause, and we document what we found and what we did. If something turns out to be a warranty matter, the record helps. Our work is independent service, and we don’t claim to represent Lennox in any way.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Fix in Inwood
Inwood is dominated by pre-war elevator apartment buildings along Broadway, Seaman, and Payson, and much of the Lennox equipment here was retrofitted into spaces that were originally designed for radiator heat. That history creates specific problems. Here’s what we find most often.
- Collapsed or torn flex duct liners. Lennox flexible duct runs have a plastic inner liner that can separate at connections, sag, or tear as it ages. Once that liner collapses, the duct chokes the airflow downstream and traps lint and dust in the fold. The system runs longer, moves less air, and the problem is invisible unless someone opens the run and looks inside.
- Dust-clogged evaporator coil fins. The coil cabinet in a Lennox air handler depends on clean return air and a tight filter fit. When filtration is poor or air bypasses the filter at the edges, the fins load with dust and lint. Efficiency drops, the coil stays damp longer, and musty odors start coming out of the supply registers.
- Debris on variable-speed blower wheels. Signature Collection systems use variable-speed blowers that spin at low speeds for long stretches. A light dust film that would get flung off a fast blower tends to stick instead. Over time the wheel goes out of balance and you hear a low hum or a thrum at startup that wasn’t there before.
- Leaking seams in metal ductwork. Older Lennox installations often have galvanized trunk and branch runs sealed with mastic that has dried and cracked, or gaskets that have hardened. Air escapes at the joints, which pulls dust into the system from unsealed spaces and skews the static pressure the system was balanced around.
- Blocked or restricted ventilation paths. Lennox Healthy Climate ventilation systems paired with furnaces depend on clear ductwork and clean cores. In a tight apartment with heavy kitchen and bath exhaust use, lint and soot collect in the ventilation runs and the HRV or ERV can’t do its job, so stale, humid air lingers instead of getting exchanged.
Lennox Parts & Our Repair-vs-Replace Approach
Duct repairs live or die on materials, not on brand labels. For critical Lennox components like blower motors and coils, we use genuine Lennox parts when we can get them. For the duct side of the job – the flex runs, the mastic, the insulation – we specify aftermarket materials that meet or exceed OEM specs, because duct repair is about fit, seal, and durability rather than a stamped logo. We don’t claim to stock OEM or genuine Lennox parts.
Repair vs replace is a judgment call that should be about the system, not a calendar. An older Lennox unit with a sound coil, clean blower, and tight ductwork is a good candidate for repair. A newer unit with a collapsing flex system, leaking seams, and a coil cabinet full of debris might be money spent in the wrong direction. We give you an honest read on the whole air distribution system. One flat price per system, agreed before work starts. Call (855) 974-7305 for a free estimate.
Our Lennox Service Process – Step by Step
- 1
Diagnosis. We run a static pressure reading and inspect the air handler, coil cabinet, flex runs, and all accessible duct seams. For Lennox equipment we pay particular attention to the filter fit at the return and the condition of the flex connections, since those failures show up as reduced airflow before anything else.
- 2
Repair or install. Depending on what we find, this might be a coil cleaning, flex duct section replacement, blower wheel cleaning, mastic and gasket sealing, or installation of a new duct section. We agree the price for the system before any work starts.
- 3
Test. We re-check static pressure and confirm airflow through the supply registers. If your system has an HRV or ERV paired with the furnace, we verify the ventilation path is clear and the unit cycles correctly.
- 4
Warranty and documentation. We note the parts used and what was repaired or replaced, which helps if a separate warranty matter comes up later. You see the before-and-after photos of your own ducts before we leave.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Inwood
We service the full range of Lennox residential and commercial HVAC products in Inwood: air handlers and their coil cabinets, ducted air distribution components, flex duct runs, metal trunk and branch ductwork, and the Healthy Climate heat recovery and energy recovery ventilators that are often paired with Lennox furnaces. We also work on Merit, Elite, and Signature Collection equipment when the issue is on the air path – the ductwork, the coil, the blower, or the ventilation system.
For duct cleaning and repair, we bring Rotobrush and Nikro equipment with negative-pressure containment using Abatement Technologies gear. Nothing about our service changes based on which Lennox series you own.
We Also Service These Brands
Inwood buildings are a mix of equipment, and your Lennox unit may share corridors and shafts with neighboring systems. We service Trane and Carrier systems on the same air-pathway scope, and we also work with Honeywell and Aprilaire air quality accessories. If your building has a blend of brands, one call covers the ductwork and the equipment connected to it.
FAQs – Lennox Air Duct Cleaning Service in Inwood
No. We are an independent service provider and have no affiliation, authorization, or sponsorship from Lennox. We work on Lennox equipment on our own terms as skilled technicians with up to 8 years of experience, and we don’t represent ourselves as a Lennox dealer, certified partner, or factory-trained shop. That independence means we tell you what the system actually needs.
Yes. For critical components like blower motors and evaporator coils, we source genuine Lennox parts when they’re available. For duct repairs, mastic, and insulation, we use aftermarket materials that meet or exceed OEM specifications, and we don’t force a part to fit. Call (855) 974-7305 for a free estimate.
Most Lennox air-pathway service in Inwood takes a few hours, depending on how many duct runs are involved and whether the coil cabinet needs cleaning. Evaporator coil cleaning and flex duct repair on a single system are usually done within a single visit. In co-op buildings where a shared riser or chase is involved, coordinating access with the super and the managing agent is often the part that sets the schedule, not the work itself.
We service Lennox air handlers, ducted air distribution components, flex and metal ductwork, evaporator coils, blower assemblies, and Healthy Climate heat recovery and energy recovery ventilators. That covers Merit, Elite, and Signature Collection equipment where the work touches the air path.
Proper cleaning and repair done by qualified technicians shouldn’t void your Lennox warranty. Manufacturer warranties protect against defects, not against routine service or normal wear. We don’t cut sealed refrigerant circuits, we don’t disturb factory components without cause, and we keep a record of the parts used and the work performed. If a warranty question comes up, that documentation helps.
Lennox air duct cleaning in Inwood is priced per system, not per vent, with one flat price agreed before work starts. The written estimate sets the final price. Pre-war apartment layouts, shared shafts, and co-op access requirements affect what a given job involves, so the estimate is based on your actual system rather than a coupon figure. Call (855) 974-7305 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Book Your Lennox Service in Inwood, NY
If your Lennox system is moving less air, smelling musty, or hasn’t had its ducts and coil looked at in years, we can help. One flat price per system, before-and-after photos, and a full air-pathway service that covers the ducts, the coil, and the ventilation equipment together. Call (855) 974-7305. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Inwood.